Had a tech day with the DeLorean Club of Florida (www.deloreanclubfl.com) and got some things accomplished with the car. (1) Finally got the horns fixed, wired up a horn relay. Will be posting more info on the whole procedure soon. (2) Sanded and spraypainted the metal bracket against the back wall of the engine bay […]
Only a bit of a problem getting the rotors shaved down. The first place I went to was being operated by a moron who couldn’t figure out how to measure the thickness of the rotor. Second place had no issue. So getting those shaved down saved a few bucks. Got all the new parts in, […]
Continued on today removing brake components after I had to buy and borrow some more tools yesterday. To this point I have flushed the old brake fluid out of the system, removed the front calipers, hubs, and unbolted the rotors from the hubs. In the rear I have removed the parking brake, rear calipers, and […]
Finished today with the cross beam of the frame beneath the engine. For anyone interested in doing this, you need the following: POR-15 (silver or gray) 60/150/400 grit sandpaper Sanding block Chisel/Screwdriver/something to scrape Paint brush Krylon Smoke Gray Optional but recommended (mask/safety glasses/gloves) Sand down and chip away loose epoxy from the rusted areas, […]